✓ Fast & Reliable Glazing Services
✓ 24 Hr Response
✓ 1 Hour Arrival

How to Fit Temporary Window Boarding Safely

A smashed window leaves more than a gap in the glass. It can expose your home, flat, shop or office to rain, cold air, theft and further damage within minutes. Knowing how to fit temporary window boarding can help you secure the opening until replacement glass is ready – but safety and a firm fitting matter far more than making the repair look tidy.

For London properties, a quick boarding-up is often the right immediate response after a break-in, accident, vandalism or storm damage. It should keep people away from dangerous glass, reduce access to the property and give you breathing space to arrange a permanent repair.

When temporary window boarding is the right choice

Temporary boarding is for a window or glazed door that cannot be made safe with a simple glass repair on the spot. That may mean the pane has shattered, the frame is damaged, the glass is missing entirely, or the opening is exposed after an attempted break-in.

It is particularly useful outside business hours, when a shopfront has been damaged and stock needs protecting, or when a residential window has failed overnight. Boarding also makes sense if specialist glass must be measured and ordered, such as toughened safety glass, double-glazed units or unusual shopfront panes.

The aim is not to create a permanent finish. A properly fitted board is a short-term security measure. It needs to resist casual entry, keep out most weather and stay stable without causing avoidable damage to the frame, brickwork or surrounding glass.

Make the area safe before you fit temporary window boarding

Do not start by reaching through the broken opening. Loose shards can fall when the frame moves, while glass hidden in the seal or bead can cut through ordinary gloves. Keep children, customers, pets and anyone not helping well away from the area.

Wear sturdy gloves, closed shoes and eye protection. If glass is still cracked in the frame, avoid pressing on it or trying to pull it out quickly. Small fragments should be swept up carefully and placed in a rigid container rather than a thin rubbish bag that could tear.

For a ground-floor home or shop, create a clear working zone on both sides of the window where possible. If the opening is above ground level, behind a counter, close to electrical fittings or part of a damaged door, it is safer to call an emergency glazier rather than attempt the work yourself. A rushed repair at height or near a compromised entrance can create a bigger problem.

Choose the right board and fixing method

Exterior-grade plywood is usually the best temporary material because it is stronger and more weather-resistant than thin hardboard, chipboard or leftover internal furniture panels. The board should be thick enough not to flex easily. In many cases, 12 mm to 18 mm plywood offers a sensible balance between strength and manageable weight.

Measure the opening carefully after loose glass has been dealt with. Decide whether the board will sit within the frame or overlap it. An overlap fitting is generally more secure because it covers the edges of the opening and gives a larger area for fixing. However, the right approach depends on the frame condition and whether you can safely access solid surrounding timber, masonry or metal.

Avoid fixing a board only into fragile uPVC sections, thin glazing beads or rotten timber. These may not hold under pressure and can make the final repair more complicated. For a shopfront or aluminium frame, incorrect screws can distort the system or damage areas needed for replacement glazing.

A professional will assess the frame, the type of glazing and the security risk before choosing the fixing points. That matters where a property has been targeted, as a lightly secured board can simply advertise an easy route back in.

Keep the property weather-conscious

A temporary board will not provide the insulation or seal of a correctly glazed window. Even a well-fitted panel may allow some draughts and condensation. If rain is expected, make sure the board covers the opening fully and does not create a channel that directs water into the frame or wall.

Do not seal over ventilation routes that serve gas appliances, bathrooms or communal areas without professional advice. In commercial premises, check that emergency exits, fire escape routes and required visibility are not affected. Security is essential, but it must not compromise safe escape from the building.

A practical fitting approach for accessible openings

If the opening is at ground level, clear of electrical hazards and you are confident working with basic tools, keep the process simple. Measure twice, cut the board so it covers the damaged section with a secure margin, and test the fit before fixing anything.

Use suitable corrosion-resistant screws and fix into sound material around the opening rather than into weak or broken parts of the window. Place fixings evenly around the perimeter so the board sits flat instead of bowing at one edge. Do not overtighten screws into a uPVC or aluminium frame, as this can crack or deform it.

Check the board from both inside and outside if you can do so safely. It should not rattle, lift at the corners or leave a gap large enough for a hand or tool to pass through. Once fixed, clear remaining debris, cover sharp edges if necessary and keep the area inaccessible until the glazing is repaired.

If you cannot achieve a solid, stable fitting quickly, stop. A loose board is not a safe temporary repair. It may fall, cause further frame damage or provide false reassurance about the property’s security.

Common mistakes that leave a property vulnerable

The most common issue is using whatever material is nearby. Thin boards, cardboard, plastic sheeting or a panel cut too small may block the view, but they do little to secure the opening. Plastic sheeting can be useful as a short-lived rain barrier from inside, but it is not a replacement for boarding.

Another mistake is leaving shattered glass in place behind the board. Movement from wind, doors closing or traffic vibration can dislodge it later. It is also easy to overlook glass around the sill, in soft furnishings or on shop floors, so inspect the wider area before reopening a room or trading space.

Property owners can also underestimate damaged locks and doors. If a break-in has affected a glazed entrance, replacing the pane alone may not restore security. Hinges, handles, locks, closers and frames may need attention at the same time.

When to call an emergency glazing team

Call for professional help immediately if there is widespread shattered glass, a large window or shopfront panel, damaged double glazing, a broken glass door, suspected structural damage or any risk to people passing nearby. The same applies if you manage a rental property and need the building secured for tenants, or if you are responsible for a commercial site outside normal working hours.

A professional emergency boarding service can remove dangerous remnants, install a properly secured temporary panel and arrange the correct replacement glass. This avoids the guesswork of matching units, safety glazing and frame systems later on.

Glazing Squad provides rapid emergency boarding and glazing support across London, with a 24-hour response for homes, flats, shops and commercial premises. For an urgent breakage, getting the opening safe first is the priority. The permanent repair can then be planned properly, without leaving your property exposed.

After the opening is secure

Take clear photographs of the damage before the area is cleaned or repaired, particularly if you may need to speak with an insurer, landlord, tenant or managing agent. Make a note of when the damage was discovered and whether police attendance or a crime reference number is relevant.

Then arrange replacement glazing as soon as practical. Temporary boards are useful for a short period, but they reduce natural light, ventilation and thermal performance. On a retail frontage, they can also affect customer confidence and visibility. A like-for-like replacement, or an appropriate upgrade where suitable, restores the appearance and protection your property needs.

A broken window is stressful, but it does not have to leave a home or business unprotected overnight. Keep people clear, secure the opening only when it is safe to do so, and get experienced help when the damage calls for it.